Integration


This is an IBM Automation portal for Integration products. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.


ADD A NEW IDEA

Pinned ideas

View all
PINNED It should be possible to step-in while debugging Flow Services
As of webMethods.io Integration 11.0.7, a Flow Service can be debugged step by step in the Flow Service editor, but for an INVOKE step, the debugger can only step over the INVOKE step. It would be very helpful if the debugger would also allow to s...
Share feedback 0
PINNED Add a "Maximum persistent reuse" parameter for the backside of an MPGW or WSP
On an MPGW or a WSP, I want to be able to configure that the persistent backside connection should be closed after X amount of requests have been sent through that connection. I can already do this for the frontside by setting the "Maximum persist...
Share feedback 1

All ideas

Showing 874

Fully synchronous replication in HA-DR solutions

A disaster is not an excuse to lose messages. Some systems require no loss of data for a local failure, (HA), and also for a site failure, (DR). Unless RQDM HA-DR or Native HA-DR solutions fully support synchronous replication we will be unable to...
about 3 years ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

Create a plugin / default option for gateway extension to recover lost configurations in DataPower

Customer is using DataPower integrated with APIC with v5 compatibility gateway. Upon restarting DataPower, the following files are restored to their default configurations. It significantly impacts the production environment when VMs / DataPower n...
about 1 year ago in DataPower Gateway 1 Not under consideration

Send Client CA List option

We want to disable Send Client CA List option in TLS Server Profile in APIC Domain of the DataPower gateway while validating client certificates. This is because the DataPower SSL server only includes DNs of valid CA certificates from the validati...
about 1 year ago in DataPower Gateway 1 Not under consideration

Permit connections without renegotiation

We need to enable the “Permit connections without renegotiation” option inside TLS client profile. This option describes - Indicate whether a connection is successful when renegotiation_info is not included in the server response during the handsh...
about 1 year ago in DataPower Gateway 1 Not under consideration

MQ performance on RHEL8 with fapolicyd enabled

After going to RHEL8 we had to enable fapolicyd due to security/STIG requirements fapolcyd is enabled in permissive mode which is non-enforcing. We see significant slowdown in throughput when fapolciyd is enabled. Would like to see performance rep...
about 1 year ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

For Aspera Orchestrator we would like to have an API endpoint to both pause and resume workorders

It would be desirable to be able to pause all running workorders at once with a single endpoint call but also to pause a specific workorder. And same applies to resuming the workorder(s) again.
about 2 years ago in Aspera Ideas 0 Not under consideration

IBM Message Broker to support Oracle TAF via JDBC

Our team uses IBM Integration Bus for different use-cases in enterprise integration.It strange to find out that IBM Integration Bus do not support common Oracle feature (DataGuard) so it causes support teams to switch database connectivity manuall...
almost 11 years ago in App Connect 3 Not under consideration

Cluster Monitoring Program AMQSCLM to support CLUSNL as well

Cluster Monitoring currently works only if a cluster queue belong to only one cluster. Working Scenario: Cluster queue defined using CLUSTER Param When we use amqsclm, the cluster monitor on a cluster queue which is a part of only one cluster it w...
about 1 year ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

Allow a character indicating generic value to be used in the first qualifier of MQ security profiles in RACF

The idea is to use a '*' character in the profile's first qualifier to simplify the creation of security profiles and reduce the number of defined profiles. Example: QMT*.NO.CONTEXT.CHECKS
over 3 years ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

MQ specific error message needed if a second Create Thread is attempted by an IMS Application linked with the wrong Stub

Customer is running at IBM MQ for z/OS V9.0.0 LTSR and IMS..An IMS Transaction Application is linked by mistake with the CSQBSTUB Batch Adapter Stub, is executed in a IMS MPP Region and creates the first connection with MQ..Since "the Batch adapte...
over 5 years ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.