Integration


This is an IBM Automation portal for Integration products. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.


ADD A NEW IDEA

Pinned ideas

View all
PINNED It should be possible to step-in while debugging Flow Services
As of webMethods.io Integration 11.0.7, a Flow Service can be debugged step by step in the Flow Service editor, but for an INVOKE step, the debugger can only step over the INVOKE step. It would be very helpful if the debugger would also allow to s...
Share feedback 0
PINNED Add a "Maximum persistent reuse" parameter for the backside of an MPGW or WSP
On an MPGW or a WSP, I want to be able to configure that the persistent backside connection should be closed after X amount of requests have been sent through that connection. I can already do this for the frontside by setting the "Maximum persist...
Share feedback 1

All ideas

Showing 874

Increase The Number Of Maximum Log Targets

We currently have 332 app-domains in our QA environment, and 227 PROD app-domains. By default DataPower creates two log-targets per domain. Within the last year, we've also onboarded DPOD, when enabling transactional log messages and WSM, DPOD cre...
over 3 years ago in DataPower Gateway 1 Not under consideration

Off load by Log Target mechanism DataPower generated files like dpmon, usage-log et al

Have need to process usage-log, dpmon, et al; DataPower generated files off-line. To have them offloaded to a remote machine (like LogTargets) so that these files may be examined over time for historical purposes. Currently there is no automated w...
over 6 years ago in DataPower Gateway 0 Not under consideration

How to expand DataPower raid disk in the cluster environment

There is no description how to expand DataPower raid disk in the CLUSTER environment in API Connect knowledge center. There is just for stand-alone DataPower in the forum topic:https://developer.ibm.com/answers/questions/460855/ibm-api-connect-how...
over 6 years ago in DataPower Gateway 0 Not under consideration

MA7R support pack - IBM MQ adapter with support for IBM MQ client version 8

Support pack MA7R (Category 3 - Product Extensions) - WebSphere MQ Adapter for Microsoft Dynamics currently doesn't seem to work with IBM MQ client version 8.We need the MA7R support pack to support IBM MQ client version 8 (8.0.0.3 and/or 8.0.0.4).
almost 10 years ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

MA7R support pack - IBM MQ adapter with support for later versions of Microsoft Dynamics AX

Support pack MA7R (Category 3 - Product Extensions) - WebSphere MQ Adapter for Microsoft Dynamics currently only supports WebSphere MQ Adapter for Microsoft Dynamics AX 2012.We need the MQ adapter to support: - Microsoft Dynamics AX 2012 R3 CU9 (a...
almost 10 years ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

Support "PROXY protocol" from HAProxy Technologies

Support for incoming connections that use the "PROXY protocol". The upstream system (proxy, load balancer) can use this to pass original client information to Datapower, e.g. the client IP address. This is useful if the traffic between the con...
over 3 years ago in DataPower Gateway 1 Not under consideration

Workload Balance at Queue level for multiple Subscriptions

RFE is for having the Workload balancing at queue level when we have multiple sucscriptions . Please refer the PMR 82575,442,000 for more details.
over 13 years ago in MQ, MQ Advanced & MQ Appliance 4 Not under consideration

Disable implicit conversion to JSONX per rule

We need a way for the implicit conversion to JSONX to be disabled for a particular MPG rule. An option to disable the implicit conversion would allow for the original IBM intent to be preserved as the default while giving customers the necessary f...
over 6 years ago in DataPower Gateway 0 Not under consideration

amqsevt output to file

amqsevt output can be redirected to a file over a pipe. This might lead to buffering issues where amqsevt is writing to a pipe and the reading part is waiting until the pipe is full. To avoid any issues amqsevt should write directly to a file. The...
over 3 years ago in MQ, MQ Advanced & MQ Appliance 1 Not under consideration

Faspex: Possibility to add an unofficial translation

For the 4.x series Faspex versions, we have made an unofficial translation, because the Hungarian language is not officially supported. We understand the reason, but it would be nice if Faspex could handle at least a language file that could be ma...
over 3 years ago in Aspera Ideas 0 Not under consideration

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.